Essential Preparation Rules<\/h3>\n\n- Eliminate Airflow:<\/strong> Turn off the car’s AC to prevent floating dust particles from landing on the display during application [00:00:45<\/a>].<\/li>\n
- Enable Screen Clean Mode:<\/strong> Turn on Screen Clean Mode in the Tesla settings menu before starting the front display prep [00:05:14<\/a>].<\/li>\n
- Clean the Protector Backing:<\/strong> Wipe down the protective film on the back of the screen guard prior to placing it over the dash so trapped dust does not transfer to the glass [00:01:01<\/a>].<\/li>\n
- Avoid Suction Cups:<\/strong> Skip the included suction cups for the rear display; manual alignment using the top corners provides a cleaner fit [00:03:35<\/a>].<\/li>\n<\/ul>\n
<\/p>\n![\"Demonstrating](\"https:\/\/www.extrafudge.com\/site\/wp-content\/uploads\/2026\/08\/images.jpg\")
<\/a>Screen Protector<\/figcaption><\/figure>\n
\nStep-by-Step Tesla Screen Protector Installation Guide<\/h3>\n\n- Prepare the Vehicle and Environment<\/strong>Timing constraint: Must be completed before peeling any film<\/em>Completing a Tesla screen protector installation<\/strong> on your Model 3 or Model Y is the best way to eliminate unwanted reflections and finger smudges while maintaining a crisp visual output. This guide walks you through the exact process for installing both the front and rear matte protectors, based on the video tutorial from ureviews on YouTube.<\/li>\n
- Install the Rear Screen Protector<\/strong>Rear display application<\/em>\n
\n- Wipe down the display thoroughly with the provided wet cleaning wipe, followed by the dry microfiber cloth [00:02:32<\/a>].<\/li>\n
- Use the dust-removal sticker to catch any micro-particles, using a light source to check for missed spots [00:03:00<\/a>].<\/li>\n
- Line up the protector evenly with the top corners of the screen [00:03:43<\/a>].<\/li>\n
- Press firmly in the center and allow the adhesive to spread outward [00:03:43<\/a>].<\/li>\n
- Use the included squeegee to push remaining air bubbles to the edge. If a large bubble remains trapped, gently lift the corner nearest to it to release the air pocket [00:04:08<\/a>].<\/li>\n<\/ol>\n<\/li>\n
- Prepare the Front Display<\/strong>Main touchscreen prep<\/em>\n
\n- Clean the screen perimeter and surface using the wet wipe, removing all fingerprint oil [00:05:07<\/a>].<\/li>\n
- Dry the entire display with the microfiber towel [00:05:40<\/a>].<\/li>\n
- Use the dust sticker across every square inch of the screen to ensure a 100% dust-free surface [00:05:51<\/a>].<\/li>\n
- Wipe down the back side of the application frame to prevent loose dust from dropping onto the glass [00:06:09<\/a>].<\/li>\n<\/ol>\n<\/li>\n
- Mount the Front Alignment Frame and Squeegee<\/strong>Final front application<\/em>\n
\n- Place the installation alignment frame directly over the front display [00:06:15<\/a>].<\/li>\n
- Pull the release tab to peel away the inner protective film.<\/li>\n
- Use the squeegee tool to press down across the center and push all trapped air bubbles out toward the outer border [00:06:24<\/a>].<\/li>\n
- Peel off the outer protective film layer and unclip the alignment frame from the screen [00:06:44<\/a>].<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n
Key Takeaways<\/h3>\n\n- Dust is the enemy:<\/strong> Any particle trapped beneath the tempered glass creates a permanent air bubble that cannot be squeegeed out [00:01:15<\/a>].<\/li>\n
- Matte vs. Glossy:<\/strong> The matte finish successfully eliminates driver-side sun glare without altering screen touch sensitivity or color accuracy [00:00:23<\/a>].<\/li>\n<\/ul>\n
<\/p>\n<\/a>
\nStep-by-Step Tesla Screen Protector Installation Guide<\/h3>\n
\n
\n
\n
\n
Key Takeaways<\/h3>\n
\n